Navigation Post an Ad
 

$250.00

1st Gen E1/T1 PRI Card from Allo.com

pri-card-1-allocom
  • Listed: December 22, 2014 4:04 pm

Description

This card supports SS7 signaling and uses a DAHDI patch which is already included in our proprietary driver.

We use the exact same chipsets as the other more expensive brands but since this is the 1st gen board design, it is VERY affordable. A 128 ms hardware based Line Echo Cancellation module can be added to reach the highest standard in voice quality on the market. Build your own open source PBX system while keeping cost at a minimum. Chose from 1-2 or 4 ports with a capacity of 30 channels per port and full duplex data throughput.

Buy this product at Allo.com >>>

 

Key Features

  • Our PRI cards support SS7 signaling
  • 128 ms Hardware based Line Echo Cancellation on OctassicTM DSP
  • ElastixTM Certified and works with AsteriskTM, FreeswitchTM, YATETM, AskoziaTM, TrixboxTM and more
  • 1, 2 and 4 ISDN-32 PRI T1/E1 ports with 30 B channels and 1 D channel per span
  • EuroISDN (PRI or PRA) – Q.931/Q.921
  • Fully PCI 2.2/PCIe compliant
  • RJ 48 connector
  • Suitable for 3.3 volts and 5.0 volts 32 bit PCI 2.2 slots

 

Target Applications

  • Voice-over Internet Protocol (VoIP) Services
  • Complex IVR Trees
  • “Meet-Me” Bridge Conferencing
  • Calling Card Platforms
  • VoIP Gateways
  • Legacy PBX/IVR Services
  • Voice/Data Router (replace expensive routers)
  • Call Center

Tech Specs

  • 1, 2 and 4 ISDN-32 PRI T1/E1 ports with 30 B channels and 1 D channel per span
  • 128 ms Hardware based Line Echo Cancellation on Octassic Tm DSP
  • EuroISDN (PRI ) – Q.931/Q.921
  • Fully PCI 2.2/PCIe compliant
  • RJ 48 connector
  • Suitable for 3.3 volts and 5.0 volts 32 bit PCI 2.2 slots
  • Line decoding: HDB3, AMI, B8ZS
  • Framing: CRC-4, Non CRC4, ESF, SF, D4

Physical & Environmental

Operating Temperature 0°C to 50°C
Storage Temperature -40°C to 125°C
Dimensions 15.4cm x 8.7cm x 1.8cm
Weight 102g

 

Leave a Reply

You must be logged in to post a comment.

To inquire about this ad listing, complete the form below to send a message to the ad poster.